Skip to content

Utility Scripts

Note

If running EdgeX in Secure Mode, you will need a Consul ACL Token and JWT Token in order to use these scripts.

Use Cases

Create new credentials and assign MAC Addresses

  1. Run bin/map-credentials.sh
  2. Select (Create New)
  3. Enter the Secret Name to associate with these credentials
  4. Enter the username
  5. Enter the password
  6. Choose the Authentication Mode
  7. Assign one or more MAC Addresses to the credential group

Assign MAC Addresses to existing credentials

Note

Currently EdgeX is unable to provide a way to query the names of existing secrets from the secret store, so this method only works with credentials which have a key in the CredentialsMap. If the credentials were added via these utility scripts, a placeholder key was added for you to the CredentialsMap.

  1. Run bin/map-credentials.sh
  2. Select the name of the existing credentials you want to assign devices to
  3. Assign one or more MAC Addresses to the credential group

Modify existing credentials

  1. Run bin/edit-credentials.sh
  2. Select the name of the existing credentials you want to modify

Warning

This will modify the username/password for ALL devices using these credentials. Proceed with caution!

  1. Enter the new username
  2. Enter the new password
  3. Choose the new Authentication Mode

List all existing credential mappings

  1. Run bin/query-mappings.sh

Output will look something like this: 

    Credentials Map:
             mycreds = 'aa:bb:cc:dd:ee:ff'
            mycreds2 = ''
            simcreds = 'cb:4f:86:30:ef:19,87:52:89:4d:66:4d,f0:27:d2:e8:9e:e1,9d:97:d9:d8:07:4b,99:70:6d:f5:c2:16'
           tapocreds = '10:27:F5:EA:88:F3'

Configure DiscoverySubnets

  1. Run bin/configure-subnets.sh
  2. (Optional) If running secure mode, enter Consul Token

configure-subnets.sh

Usage

bin/configure-subnets.sh [-s/--secure-mode] [-t <consul token>]

About

The purpose of this script is to make it easier for an end user to configure Onvif device discovery without the need to have knowledge about subnets and/or CIDR format. The DiscoverySubnets config option defaults to blank in the configuration.yaml file, and needs to be provided before a discovery can occur. This allows the device-onvif-camera device service to be run in a NAT-ed environment without host-mode networking, because the subnet information is user-provided and does not rely on device-onvif-camera to detect it.

This script finds the active subnet for any and all network interfaces that are on the machine which are physical (non-virtual) and online (up). It uses this information to automatically fill out the DiscoverySubnets configuration option through Consul of a deployed device-onvif-camera instance.

edit-credentials.sh

Usage

bin/edit-credentials.sh [-s/--secure-mode] [-u <username>] [-p <password>] [--auth-mode {usernametoken|digest|both}] [-P secret-name] [-M mac-addresses] [-t <consul token>]

About

The purpose of this script is to allow end-users to modify credentials either through EdgeX InsecureSecrets via Consul, or EdgeX Secrets via the device service.

map-credentials.sh

Usage

bin/map-credentials.sh [-s/--secure-mode] [-u <username>] [-p <password>] [--auth-mode {usernametoken|digest|both}] [-P secret-name] [-M mac-addresses] [-t <consul token>]

About

The purpose of this script is to allow end-users to add credentials either through EdgeX InsecureSecrets via Consul, or EdgeX Secrets via the device service. It then allows the end-user to add a list of MAC Addresses to map to those credentials via Consul.

query-mappings.sh

Usage

bin/query-mappings.sh [-s/--secure-mode] [-u <username>] [-p <password>] [--auth-mode {usernametoken|digest|both}] [-P secret-name] [-M mac-addresses] [-t <consul token>]

About

The purpose of this script is to allow end-users to see what MAC Addresses are mapped to what credentials.